MC is a trusted manufacturer and supplier of high-quality C70600 copper-nickel 90° long-radius elbows. These elbows comply with ASME B16.9 and are suitable for pressure ratings of 10–20+ bar. Their design and production can meet stringent national and international standards, including ASTM, DIN, JIS, BS, ANSI, MIL-STD, and EEMUA.
Our C70600 copper-nickel 90° elbows are manufactured from a copper-based alloy containing approximately 10% nickel, together with controlled additions of iron and manganese. Known for excellent corrosion resistance, mechanical strength, and durability, they are ideal for marine piping systems, offshore platforms, seawater desalination plants, and heat-exchanger applications.
Combining a seamless forming process with the ASME B16.9 standard for factory-made wrought butt-welding fittings, these 90° elbows provide smooth flow transitions, balanced pressure-bearing capability, fewer welds, and reliable sealing performance. They can effectively reduce localized pressure loss and extend the service life of the entire piping system. Each elbow is designed to ensure accurate installation, leak-free connections, and stable long-term operation in demanding environments.

Key Advantages of C70600 Copper-Nickel Alloy
C70600, also known as B10 or 90/10 copper-nickel alloy, contains copper as the balance, 9.0%–11.0% nickel, and small amounts of iron and manganese for enhanced performance. It delivers excellent overall properties in seawater environments and is widely recognized as a classic corrosion-resistant material for marine piping systems.
Main Performance Advantages
Excellent Seawater Corrosion Resistance
Copper-nickel alloy forms a dense and protective oxide film in flowing seawater. It offers good resistance to uniform corrosion, pitting corrosion, and crevice corrosion, making it particularly suitable for long-term seawater exposure in cooling systems, ballast water lines, and similar applications. Its resistance to marine biofouling is also better than that of many stainless steel materials, helping reduce the attachment and growth of marine organisms on the inner pipe wall.Excellent Erosion-Corrosion Resistance
Under high-flow seawater conditions or in seawater containing sand particles, C70600 provides good resistance to erosion-corrosion. It has a broad allowable flow-velocity range and can meet the design requirements of seawater piping systems.Good Mechanical Properties and Fabrication Performance
The material combines relatively high strength with good ductility. It offers excellent hot- and cold-working properties, as well as reliable weldability, making site installation and welding more convenient.Stable Long-Term Service Life
C70600 maintains stable performance during long-term use in seawater environments. Its lower maintenance and replacement requirements provide clear advantages in terms of total life-cycle cost.
C70600 Copper-Nickel 90° Seamless Elbow Specifications
| Item | Available Range |
| Product Name | C70600 Copper-Nickel Alloy 90° Seamless Elbow |
| Material | UNS C70600 / 90-10 Copper-Nickel Alloy |
| Standard | ASME B16.9; project-specific requirements available upon confirmation |
| Elbow Type | Long Radius (LR), Short Radius (SR) |
| Manufacturing Process | Seamless hot pushing, hot pressing, die forming, or customized forming |
| Size Range | DN15–DN600, customizable upon request |
| Wall Thickness | SCH 5S–SCH 80S, customizable upon request |
| End Connection | Butt-weld ends (BW), bevels machined in accordance with ASME B16.25 |
| Pressure Rating | PN25–PN40, customizable |
| Temperature Range | -20°C to +400°C |
Surface Condition | Natural finish, pickled/cleaned, or as required |
| Delivery Method | Individual pieces, bulk supply, or complete engineering project supply |
| Additional Services | Bevel machining, dimensional inspection, marking, packaging, etc. |
Main Features of C70600 Copper-Nickel Seamless Elbows
1. Excellent Seawater Corrosion Resistance
C70600 copper-nickel alloy forms a stable and dense protective film in seawater environments. It resists uniform corrosion, localized corrosion, and seawater erosion, making it suitable for long-term exposure to seawater, saltwater, and high-humidity salt-spray environments.
Typical applications include seawater cooling pipelines, marine ballast water systems, seawater fire-fighting systems, seawater desalination plants, offshore platform transfer lines, coastal power plant circulating-water systems, and pipelines carrying chloride-containing media.
2. Resistance to Erosion and High-Velocity Flow Corrosion
In seawater circulation, cooling, and pumping pipelines, elbows are often exposed to the erosive effect of high-velocity fluids. C70600 has strong resistance to flow-induced corrosion, helping reduce wall thinning, wear, and corrosion perforation.
It is particularly suitable for bends, reducers, branch lines, and flow-converging or flow-dividing sections, improving the overall durability of the piping system.
3. Seamless Structure and Stable Pressure Performance
Seamless elbows are manufactured from seamless pipe billets through hot pushing, die forming, hot forming, or similar processes. With no longitudinal weld seam, the fitting has more uniform stress distribution and can adapt to specified pressure and temperature variations.
In marine engineering, shipbuilding, and industrial circulation systems, this structure improves long-term operational reliability under vibration and pressure fluctuations.
4. ASME B16.9 Compliance and Excellent Dimensional Compatibility
Products can be manufactured in accordance with ASME B16.9 dimensional requirements, allowing convenient installation with standard seamless pipes and butt-weld fittings.
Common options include:
90° long-radius elbows (LR)
90° short-radius elbows (SR)
Seamless butt-weld elbows
Elbows with customized wall thicknesses
Elbows with customized end bevels
Long-radius elbows provide smoother directional changes and lower localized flow resistance. Short-radius elbows are suitable for installations with limited space. The final selection should be based on site dimensions, flow velocity, and system pressure.
Typical Applications
C70600 copper-nickel alloy 90° seamless elbows are widely used in the following marine and offshore piping systems:
Seawater Cooling Systems
Used for directional connections in seawater cooling lines for main engines and auxiliary equipment, providing resistance to seawater corrosion and erosion.
Ballast Water Systems
Used in ballast water piping systems subjected to frequent filling and discharge cycles and continuous seawater exposure.
Condensers and Heat-Exchange Systems
Used as piping connections with copper-nickel alloy tube bundles. The compatible material combination helps reduce the risk of galvanic corrosion.
Marine Fire-Fighting and Seawater Main Systems
Used for direction changes in seawater fire lines and seawater main headers.
Offshore Platforms and Seawater Desalination Plants
Suitable for piping systems operating in high-salinity, high-corrosion, and salt-spray environments.
Naval Vessels and Specialized Ships
Suitable for critical piping sections where high corrosion resistance and long-term reliability are required.
Manufacturing Process for 90° Copper-Nickel Elbows
The product is manufactured using a seamless hot-forming process. High-quality C70600 seamless pipe billets are used as raw material, heated by induction, and formed through medium-frequency pushing or die pressing equipment.
After forming, solution heat treatment is performed to restore the material microstructure and mechanical properties. The elbows then undergo sizing, bevel machining, surface treatment, non-destructive testing, and final inspection.
Full heat-number traceability is maintained throughout the manufacturing process. Chemical composition, mechanical properties, and dimensional data can be traced for each production batch.
Quality Control
1.Chemical Composition
Spectral analysis is conducted for each heat. Nickel, iron, manganese, and other alloying elements are strictly controlled.
2.Mechanical Properties
Tensile testing, hardness testing, and other performance inspections are carried out by batch.
3.Dimensional Accuracy
Critical dimensions, including angle deviation, end-face perpendicularity, and wall-thinning ratio, are inspected piece by piece in accordance with ASME B16.9 tolerances.
4.Non-Destructive Testing
Radiographic testing (RT), liquid penetrant testing (PT), and hydrostatic testing can be provided as required to ensure product density, integrity, and surface quality.
5.Classification Society Certification
CCS, DNV, ABS, LR, BV, and other classification society certificates can be provided according to project requirements.

FAQ
Q: How should I choose between C70600 and C71500 elbows?
A: For conventional seawater cooling, ballast water, deck washdown, and stable flow conditions, C70600 is generally recommended due to its strong cost-performance ratio. For high-velocity flow, sand-containing seawater, or highly corrosive nearshore environments, C71500 (70/30 copper-nickel) is recommended because it offers stronger erosion-corrosion resistance.
Q: Can an ASME B16.9 elbow be directly welded to C70600 seamless pipe?
A: Yes. Using matching material grades and the same schedule rating for butt-weld connection is a standard and reliable solution, provided the pressure rating and project requirements are consistent.
Q: What is the difference between seamless elbows and welded elbows?
A: Seamless elbows are integrally formed by hot pushing or hot forming and do not have a weld seam in the elbow body. They are suitable for highly erosive and corrosive media such as seawater. Welded elbows have a circumferential weld seam, which may present a higher corrosion risk. For primary seawater pipelines, seamless elbows are generally preferred.
Q: Can classification society certificates be provided?
A: Yes. CCS, DNV, LR, and other marine classification certificates can be provided. Please specify your certification requirements before placing an order.
Original Source: https://www.marinealum.com/a/c70600-copper-nickel-alloy-900-seamless-elbow-asme-b169-corrosion-resistant-butt-weld-fitting.html
Tag: C70600 copper-nickel elbow C70600 CuNi 90° elbow 90-degree copper-nickel elbow 90° long-radius copper-nickel elbow 90/10 CuNi seamless elbow ASME B16.9 copper-nickel fittings marine copper-nickel fittings ASME B16.9 CuNi 90/10 butt-weld elbow UNS